Kegco 24" Wide Single Tap All Stainless Steel Outdoor Built-In Right Hinge Kegerator with Kit

Take your BBQ's and pool parties to the next level with Kegco's HK38SSU-1 Digital Outdoor Undercounter Kegerator, the outdoor beer dispenser your backyard or patio has been missing! Featuring a versatile design, a fully equipped draft dispense system, and a durable stainless steel exterior designed to withstand the elements, this kegerator is the ideal way to enjoy cold beer, coffee, kombucha, or wine while enjoying some beautiful weather. At 3200 BTUs, it boasts the most powerful compressor in its class, delivering unprecedented cooling for fast recovery and temperature pulldown.

A premium kegerator should have only the highest quality components, so Kegco has included a premium direct draw kit with the HK38SSU-1 that has been specially designed to give you the most convenient and reliable draft beer parts at an unbeatable value.

• Outdoor kegerator can be built in undercounter to provide a seamless look to your backyard BBQ island or outdoor kitchen
• Premium dispense components include 100% Stainless Steel Beer Contact, Premium Double Gauge Regulator, and Corrosion-resistant Electric Red CO2 Tank
• Forced air refrigeration and an air cooled tower ensure even cooling throughout the cabinet and ice cold beer with every pour
• At 3200 BTUs, the commercial grade compressor is the most powerful in its class and delivers unbeatable cooling for fast recovery and temperature pulldown
• This versatile kegerator features a wide 32-59 F temperature range that makes it suitable for serving ice cold beer or dispensing wine at its ideal temperature

Features

• Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish
  This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in electric red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 valves are CGA approved, and have a male thread for CO₂ Regulators. An average fill is good for 5-6 kegs depending upon your fill.
• Includes Premium Double Gauge CO₂ Regulator
  The regulator works with any CO₂ tank with a CGA-320 valve and measures PSI, as well as the volume of the CO₂ gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside of the keg.
• Includes 5 feet of 5/16" I.D. Blue Air Line Assembly with 2 Snap Clamps
  This standard length 5 foot 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.
• Includes a D system lever handle keg coupler that can tap all domestic kegs
  This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
• Includes a Kegco Exclusive 14" Tall, 3" Diameter Polished Stainless Steel Draft Tower
  This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
• All dispensing accessories are UL recognized components
• Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
• Large enough to hold most full size kegs, including Coors and Miller. Interior height is a limitation, so kegs that are taller than the standard half barrel (23.25") may not fit with the keg coupler installed. We have run into this issue with certain German kegs along with the M system coupler, but most major brands in D and S System kegs will not be an issue.
• Holds (1) full-size keg, (2) quarter slim kegs, (3) 5 gallon commercial kegs, or (3) 5 gallon home brew kegs
• PLEASE NOTE: Will not hold 50L European kegs
• Durable all stainless steel exterior makes it suitable for outdoor use
• Digital temperature control keeps temperature between 32-59 degrees Fahrenheit
• Maximum Ambient Temperature: 100 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
• A perfect option for dispensing beer, soda, kombucha, wine or cold brew coffee
• Stainless steel guard rail helps prevent mugs and glasses from sliding off
• Stainless steel interior is more durable than the plastic liner found in most kegerators
• Plugs into standard home outlet
• UL, NSF-7 & ETL Sanitation listed

Specifications

• Dimensions

  • Height: 34-1/8"
  • Width: 24"
  • Depth: 25" (without Handle)

• Weight

  • Unit Weight: 96.8 lbs.
  • Shipping Weight: 150 lbs.

• Warranty

  • Labor: 1 Year
  • Parts: 1 Year
  • Compressor (Parts Only): 5 Year

• Exterior

  • Cabinet: Stainless Steel
  • Drip Tray: Yes
  • Guard Rail: Yes
  • Casters: Yes

• Keg Storage Capacities

  • Full Size / 1/2-Barrel: Holds 1
  • Pony Size / 1/4-Barrel: Holds 1
  • 1/4-Barrel Slim: Holds 1
  • 1/6-Barrel: Holds 3
  • 5 gal. Ball/Pin Lock Keg: Holds 3
  • 5-Liter / Mini Keg: Holds 3

• Key Features

  • Built-in Capable: Yes
  • Keg Coupler: Yes
  • Security Lock: Yes
  • Regulator: Yes
  • CO2 Tank: Yes
  • Cleaning Kit: Optional Add-On
  • Outdoor Use: Yes
  • Commercial Use: Yes

• Door

  • Color / Material: Stainless Steel
  • Number of Doors: 1
  • Door Handle: Towel/Curved
  • Field Reversible: Yes
  • Accepts Custom Overlay Panel: No

• Draft Beer Tower

  • Number of Faucets: 1
  • Material: Stainless Steel
  • Height: 14"
  • Diameter: 3"

• Cooling System

  • Type: Compressor
  • Defrost System: Manual
  • Front Ventilation: Yes

• Controls

  • Adjustable Thermostat: Yes
  • Digital: Yes

• Electrical

  • Electrical Requirements: 115v/60hz
  • Running Amps: 1.7 A